Trusted Harmonic Filter Manufacturer in India
Drives, rectifiers and furnaces in your plant are creating harmonics, which cause overheating, equipment failures and poor power factor. CTR, a leading harmonic filter manufacturer in India, offers a hybrid harmonic reactor filter that fixes both problems in one cubicle.
50 A- 1200 A
in a single cubicle
400/500/690 V
AC Systems
200 kVA+
non-linear loads plants
2-in-1
harmonic + power factor
What You Get
TWO FIXES,ONE SYSTEM
Harmonic Mitigation + real time power factor correction in a single system.
WIDE RANGE
400 / 525 / 690 V AC, 50 A to 1200 A in a single cubicle.
HYBRID DESIGN
Hybrid design: Active Harmonic Filter (AHF) with passive filter on common CTs.
REMOTE MONITORING
Ethernet / RS 485, with display, data logging and THD reporting (optional).
LONGER EQUIPMENT LIFE
Fewer voltage sags, swells and transients, so your equipment lasts longer and runs more efficiently.
How It Works
SENSES
The filter senses your load’s voltage and current waveforms.
INJECTS
It injects the required reverse harmonics in shunt with the load and source.
CORRECTS
Distortion is cancelled and power factor improves, automatically and in real time.
BEST FOR INDUSTRIAL PLANTS
Industrial plants with rectifiers, furnaces and variable frequency drives, especially where non-linear loads exceed 200 kVA.
CERTIFIED AND TRUSTED BUILD TO STANDARD
- IS 13340:1993
- Approved by industrial customers
WHY CHOOSE CTR MANUFACTURING PVT. LTD.
As an Indian harmonic filter manufacturer, CTR gives you local engineering support, a solution matched to your load, and a product proven in industrial plants.
Need the Right Harmonic Filter for Your Plant?
Tell us your load and voltage, and our engineers will recommend the right rating.
Trusted BY Major Industry Leaders
Frequently Asked Questions
If your plant runs drives (VFDs), rectifiers, furnaces or other non-linear loads above 200 kVA, you likely do.
A passive filter uses reactors and capacitors for fixed harmonics. An active filter injects cancelling currents and adapts to load changes. The CTR hybrid filter combines an Active Harmonic Filter (AHF) with a passive filter on common CTs, giving harmonic correction and real-time power factor correction in one cubicle.
Yes. It works as a real-time power factor correction system along with harmonic mitigation, so you don’t need a separate solution for each problem.
Yes. Optional data management provides display, logging and transmission of electrical parameters, energies, power quality and THD over Ethernet / RS 485 through internet connectivity.
The filter connects in shunt (parallel) with your load and source, so it does not sit in the main power path. Our engineers will check your existing setup and CT locations before recommending the installation.